Fork Mounted Work Platform - For the manufacturer to comply with standards, there are certain standards outlining the standards of lift truck and work platform safety. Work platforms could be custom designed so long as it meets all the design criteria in accordance with the safety standards. These customized made platforms ought to be certified by a licensed engineer to maintain they have in actuality been made according to the engineers design and have followed all requirements. The work platform ought to be legibly marked to show the name of the certifying engineer or the maker.
Specific information is needed to be marked on the machinery. For example, if the work platform is custom-made made, an identification number or a unique code linking the certification and design documentation from the engineer must be visible. When the platform is a manufactured design, the serial or part number so as to allow the design of the work platform ought to be marked in able to be associated to the manufacturer's documentation. The weight of the work platform when empty, along with the safety requirements that the work platform was built to meet is among other vital markings.
The utmost combined weight of the devices, individuals and materials allowable on the work platform is referred to as the rated load. This particular information must likewise be legibly marked on the work platform. Noting the minimum rated capacity of the forklift which is needed to safely handle the work platform can be determined by specifying the minimum wheel track and lift truck capacity or by the make and model of the forklift that could be used with the platform. The process for connecting the work platform to the forks or fork carriage must also be specified by a licensed engineer or the producer.
Different safety requirements are there to be able to ensure the base of the work platform has an anti-slip surface. This should be placed no farther than 8 inches above the regular load supporting area of the forks. There must be a means provided to be able to prevent the work platform and carriage from pivoting and turning.
Only skilled drivers are certified to operate or work these equipment for hoisting workers in the work platform. Both the work platform and lift truck need to be in compliance with OHSR and in good working condition prior to the use of the system to hoist staff. All producer or designer instructions which pertain to safe use of the work platform must likewise be existing in the workplace. If the carriage of the lift truck is capable of pivoting or revolving, these functions need to be disabled to maintain safety. The work platform must be secured to the forks or to the fork carriage in the precise manner given by the work platform manufacturer or a licensed engineer.
Another safety requirement states that the rated load and the combined weight of the work platform must not go over 1/3 of the rated capacity for a rough terrain lift truck. On a high forklift combined loads must not go over one half the rated capacities for the configuration and reach being used. A trial lift is needed to be carried out at each and every job location instantly prior to hoisting employees in the work platform. This process ensures the forklift and be located and maintained on a proper supporting surface and even to be able to ensure there is enough reach to put the work platform to allow the task to be finished. The trial process likewise checks that the boom can travel vertically or that the mast is vertical.
A trial lift must be done at every task location immediately before hoisting staff in the work platform to ensure the forklift can be situated on an appropriate supporting surface, that there is adequate reach to place the work platform to allow the job to be completed, and that the mast is vertical or the boom travels vertically. Utilizing the tilt function for the mast could be used to be able to assist with final positioning at the job site and the mast ought to travel in a vertical plane. The test lift determines that ample clearance can be maintained between the elevating mechanism of the lift truck and the work platform. Clearance is likewise checked in accordance with scaffolding, storage racks, overhead obstructions, as well as any surrounding structures, as well from hazards like energized device and live electrical wire.
A communication system between the lift truck driver and the work platform occupants have to be implemented to be able to efficiently and safely control work platform operations. If there are several occupants on the work platform, one person has to be designated to be the main individual responsible to signal the lift truck driver with work platform motion requests. A system of arm and hand signals need to be established as an alternative means of communication in case the main electronic or voice means becomes disabled during work platform operations.
In accordance with safety measures, staff should not be moved in the work platform between separate job locations. The work platform has to be lowered so that personnel could exit the platform. If the work platform does not have guardrail or enough protection on all sides, each occupant ought to have on an appropriate fall protection system attached to a selected anchor point on the work platform. Employees ought to perform functions from the platform surface. It is strictly prohibited they do not stand on the guardrails or utilize whichever devices in order to increase the working height on the work platform.
Finally, the driver of the lift truck ought to remain within 10 feet or 3 metres of the controls and maintain contact visually with the work platform and lift truck. When occupied by workers, the operator needs to follow above requirements and remain in full communication with the occupants of the work platform. These information aid to maintain workplace safety for everyone.
Click to Download the pdf